laminated structure
英 [ˈlæmɪneɪtɪd ˈstrʌktʃə(r)]
美 [ˈlæmɪneɪtɪd ˈstrʌktʃər]
层压（层状，胶合板）结构
双语例句
- Test results of this lot of material exhibited scattered corrosion fatigue data, mainly caused by laminated structure and nonhomogeneous microstructure, effected by composition segregation, as well as by the excessive amount of inclusions and their nonhomogeneous distribution.
结果表明：该批材料腐蚀疲劳数据散乱。其主要原因是材料存在由成分偏析引起的层状结构和组织结构不均匀，夹杂物超标和分布不均匀。 - The results show that the loss factor of a laminated structure is stepped up by using magnetostrictive material as the constrained layer.
对板、曲板等算例的计算结果表明，用磁致伸缩材料作约束层可使层合结构损失因子提高。 - Research on the Method of Stress Analysis around Cutout in Laminated Structure
复合材料叠层结构孔口附近应力分析方法研究 - This paper adopts flexible pipe as a laminated structure consisting of multiple anisotropic reinforced layers and multiple isotropic rubber layers, and based on 3D anisotropic elastic theory, derives analytic solutions for mechanical response of flexible pipe under internal pressure.
本文将软管作为由多层各向异性增强层和多层各向同性橡胶层组成的层合结构，基于三维各向异性弹性理论提出内压作用下软管力学响应的解析解答。 - One is that through the plus or minus of the longitudinal fibers to determined put forward by Bert in 1977, its object of study for the orthotropic materials, and used to study composite laminated structure.
一种是Bert于1977年提出的以纤维纵向应变的正负为准则的模型，其研究对象为正交各向异性材料，该模型用于研究复合材料叠层结构。 - Under the condition that the reliability of the laminated structure of composite materials is satisfied, the paper took the smallest possible total thickness as the objective function and carried out the optimal design of the fibre directional angle and thickness of composite materials.
在满足层合结构系统可靠度的情况下，以总厚度最小为目标函数，对复合材料的纤维方向角和厚度进行优化设计。 - Based on the new first order thermal laminated theory which is proposed by the author, the thermal laminated theory and FEM equation for nonlinear heat transfer analysis of composite laminated structure are constructed, the composite material nonlinearity is taken into account.
基于一阶热层合理论，考虑材料非线性的影响，建立了复合材料层合结构非线性传热分析的热层合理论及其有限元方程。 - Experimental study on the effect of stacking sequence on the carrying capacity of the laminated structure
铺层顺序对复合材料层合结构承载的影响 - This paper presents the experimental and analytical of the three point bending for the laminated structure, and gets the load-displacement curves of structures.
本文针对研制的叠层结构进行了三点弯曲实验研究，得到了位移-载荷曲线。 - On basis of that, a tri-band circularly polarized microstrip antenna with laminated structure and multi fed geometry has been developed, as well as a planar self-complementary Archimedean spiral antenna and its balun.
在此研究基础上分别设计了一款叠层多馈形式的三频段圆极化微带贴片天线及一款平面自互补结构阿基米德螺旋天线及其平衡馈电巴伦。